The Franke V1619-6-3 countertop sink is a top-mounted one-compartment sink with a rear area for plumbing. Made from 304-type stainless steel (CNS 18/10) with a caliber of 18 (1.2 mm), it combines a mirror-finished rim and a satin-finished no. 4 bowl. A protective coating is applied under the bowl to reduce condensation and resonance. Installation is facilitated by the EZ Claw system and the product comes with pre-applied edge seal, cutting template and mounting hardware.
Characteristics
- Brand: Franke
- Model / SKU: V1619-6-3
- Dimensions: 18 1/2″ x 16 7/16″ (47.0 cm x 41.7 cm)
- Faucet holes: 3
- Drain hole: 1 1/4″
- Country of origin: China
- Material: Type 304 stainless steel, CNS 18/10
- Caliber: 18 ga (1.2 mm)
- Gone are: Mirrored rim, satin-finished bowl no 4
- Overall dimensions: 16 3/8″ × 18 1/2″ (416 × 470 mm) front-to-back × left-to-right
- Size of the bowl: 11″ × 15 3/16″ × 6″ (279 × 386 × 152 mm) front-to-back × left-right × depth
- Number of taps holes: 3
- Sewer pipe diameter: 4″ (102 mm) centret
- Location of the drain: Centre back
- Drainage size: 1 1/4″ (32 mm)
- Too full: No
- Wheelchair accessibility: Yes
- Certifications: cUPC, ASME A112.19.3-2008 / CSA B45.4-08, ADA, ANSI A117.1, CSA B651
- Type of installation: Topmount (embedded from above)
- Installation system: EZ Claw
- Article number: 214.0493.207
Strengths
- Topmount installation with EZ Claw mounting system
- Backboard for plumbing (faucet ledge)
- 3 plumbing holes with a diameter of 1 1/8″ (28 mm), a spacing of 4″ (102 mm)
- Mirror finish rim, satin finish bowl no 4
- Coated under the bowl to reduce condensation and resonance
- Pre-applied edge joint in the factory, cutting template and hardware included
- Centrifugal rear drain, accepts a 1 1/4″ (32 mm) drain assembly
- Accessible to wheelchair users (ADA/CSA B651 compliant)
- Without too much fuss
Technical specifications
- cUPC
- Vanity Basins
- FAS:4009726
