The Franke LBS6410PCB-1-1 commercial sink is a simple top-mount sink with a faucet ledge, made of 304-type stainless steel (CNS 18/10) with a gauge of 18 (1.2 mm). The exposed surfaces have a #4-gloss finish and an acoustic insulation coating under the bowl reduces condensation and resonance. It comes complete with the drain connection, the factory-applied rim seal, the cutting template, and the EZ TORQUE™ factory-installed mounting hardware. This model is certified ASME A112.19.3-2008 / CSA B45.4-08 and includes a pre-drilled 1½» (38 mm) diameter faucet hole.
Characteristics
- Brand: Franke
- Model / SKU: LBS6410PCB-1-1
- Collection: Commercial Systems
- Color / Finish: Stainless steel
- Dimensions: 16 1/8″ x 20 9/16″ (41 cm x 52 cm)
- Faucet holes: 1
- Drain hole: 3.5″
- Country of origin: Canada
- Material: Type 304 stainless steel (CNS 18/10)
- Caliber: 18 ga (1.2 mm)
- Surface finished: #4 Satiné
- Overall dimensions: 16 1/8″ (L) × 20 9/16″ (P) — approx. 410 × 522 mm
- Number of tanks: 1
- Faucet repair: Yes (with ledge)
- Number of faucet holes: 1 (option -1: 1 hole, diameter 1½»
- Evacuation location: Centre back
- Evacuation size: 3 1/2″ (89 mm)
- Tail diameter: 1 1/2″ (38 mm)
- Certifications: ASME A112.19.3-2008 / CSA B45.4-08 (cUPC)
- Mounting system: EZ TORQUE™
- Pose type: Topmount (on plan) / Embedded above
Strengths
- Single sink (1 basin) recessed above (topmount/flush mounted) with faucet ledge
- Stainless steel type 304 (CNS 18/10), caliber 18 (1.2 mm)
- No more satin finish #4 on all exposed surfaces
- Soundproofing coating under the tank to reduce condensation and resonance
- EZ TORQUE™ mounting system installed in-house for easy installation
- Bevel joint and cut-out template included
- 3½» (89 mm) crumb cup strainer outlet fitting with 1½» (DN38) brass tail included
- 1 ½» (38 mm) diameter tap hole (option -1)
- Certified ASME A112.19.3-2008 / CSA B45.4-08 (cUPC)
- Evacuation centered at the rear bottom of the tank
Technical specifications
- cUPC
- Made in Canada
- Commercial Systems
- 1 tap hole
- Evacuation orifice 3.5″
